Professional Installation & Assembly

• Our delivery partner will bring ready to assemble items into your home, unpack, and then assemble them in the room of choice.
• Any/all manufacturer included safety mounts or restraints will be installed to ensure item(s) are assembled correctly and safe to use.
• You will receive assembly instructions and manufacturer supplied paperwork.
• Our partner will clean up work areas and remove all tools, supplies, and packing materials from your home.

Exclusions:

• This does not include moving of any furniture currently in home.
• This does not include haul away of any old furniture.

A new dishwasher connection kit must be purchased from NFM for our installation partner to install a dishwasher.

• Uninstall existing dishwasher and install new unit according to manufacturer specifications and customer's satisfaction.
• Run test cycle to verify water fill, drain, and free of leaks.
• Demonstrate basic operations as well as set clock and presets if applicable.

• Uninstall existing disposal and install new unit.
• Test drain line connections, discharge hose connection and disposal unit.
• Checks and verifies that all functions are operational and free of leaks.

• Uninstall existing OTR and install new unit.
• Secure to existing wall and cabinetry.
• Connect to existing and functional electrical outlet and duct work.
• Level and test unit.

• Our installation partner performs a pre-site survey to see if installation can be completed.
• Gas service is shut-off at the valve and verified to be off before gas is disconnected from an appliance. If no shut-off valve is present, additional charges may be assessed to terminate gas service and install a shut-off valve.
• Installation partner ensures line is capped and there are no leaks.
• Existing wall oven is disconnected and removed from surrounding cabinets and fixtures.
• The new appliance is installed according to the manufacturer's specifications and customer's satisfaction.
• Installation partner checks and verifies that all functions are operational, walks customer through a demo of basic operations for their new appliance and sets the clock and presets, if applicable.
• Before leaving, our installation partner ensures all work areas are neat, clean, and dry.

• Our installation partner performs a pre-site survey to determine if the installation can be completed.
• Gas service is shut-off at the valve and verified to be off before gas is disconnected from an appliance. If no shut-off valve is present, additional charges may be assessed to terminate gas service and install a shut-off valve.
• Installation partner ensures line is capped and there are no leaks.
• After removing your old appliance, our installation partner determines, discusses and documents charges necessary for additional labor, parts, or permits that are needed to proceed with installation. Customers will need to sign off on any proposed changes.
• The new appliance is installed according to the manufacturer's specifications and customer's satisfaction.
• Installation partner checks and verifies that all functions are operational, walks customer through a demo of basic operations for their new appliance and sets the clock and presets, if applicable.
• Before leaving, our installation partner ensures all work areas are neat, clean, and dry.
• Customer will be asked to sign and date any necessary forms after installation is completed.

• Our installation partner performs a pre-site survey to determine if the installation can be completed.
• If a permit for installation is necessary, our partner will attain one. Customer is responsible for price of permit.
• Before beginning installation, our installation partner will ensure the area is adequately protected from inadvertent damage. The customer will also be advised of any services that may need to be shut down.
• The work area will be adequately ventilated during installation.
• Gas service is shut-off at the valve and verified to be off before gas is disconnected from an appliance. If no shut-off valve is present, additional charges may be assessed to terminate gas service and install a shut-off valve.
• The new appliance is installed according to the manufacturer's specifications and customer's satisfaction.
• The cooktop is secured to the countertop and leveling brackets are screwed to the bottom of cabinet.
• Our Installation partner reconnects gas service and ventilation to new gas appliance, turns gas service back on, and tests all connections for leaks.
• Installation partner checks and verifies that all functions are operational, walks customer through a demo of basic operations for their new appliance and sets the clock and presets, if applicable.
• Before leaving, our installation partner ensures all work areas are neat, clean, and dry.
• Customer will be asked to sign and date any necessary forms after installation is completed.

• Our installation partner performs a pre-site survey to determine if the installation can be completed.
• Before beginning installation, our installation partner will ensure the area is adequately protected from inadvertent damage. The customer will also be advised of any services that may need to be shut down.
• After removing your old range hood, our installation partner determines, discusses and documents charges necessary for additional labor, parts, or permits that are needed to proceed with installation. Customers will need to sign off on any proposed changes.
• The new range hood is installed according to the manufacturer's specifications and customer's satisfaction.
• Installation partner checks and verifies that all functions are operational and walks customer through basic operation of their new range hood.
• Before leaving, our installation partner ensures all work areas are neat, clean, and dry.

• Secure mounting bracket to standard drywall.
• Mount and secure flat panel TV to mounting bracket.
• Conceal in-wall rate cables for A/V devices through a standard frame wall if possible. All cables must be in-wall rated, otherwise they will remain exposed.
• Connect and configure new or existing audio and video components in a single room.
• Clean wire management.
• Configure up to two Smart TV/Blu-Ray configurations for streaming services. (i.e. Hulu, Netflix, etc.)
• Program a non-learning universal remote.
• Set up parental controls upon request.
• Verify product functionality.
• Demonstrate basic TV functions.

• Includes everything in Standard TV Mounting in addition to the services below.
• Mount to a surface other than drywall, such as a decorative surface (marble, stone, brick, shiplap, etc.)
• Mount a motorized mount to any standard surface.
• Mount above a fireplace.
• Our installation partner may need to validate that mounting service can be completed based on client needs and wants.

• Mount and secure soundbar.
• Attach customer or manufacturer supplied cables from source to soundbar.
• All cables used in walls must be in-wall rated. If not, cables will be left exposed.
• Program of a non-learning type or manufacturer supplied remote.
• Clean wire management.
• Verify product functionality.
• Demonstrate basic soundbar functions.
• Must be sold with Standard or Advanced TV Mounting - Add on service only.

• Before installation in a multi-family dwelling (apartment), the customer will need to provide written authorization for complete wire concealment, as installation requires drilling access holes.
• Verify proper operation of the display to be powered via IWPE prior to beginning work.
• Plug in the IWPEs supplied external cord to an existing grounded outlet or surge protector.
• Use of accessories packaged with IWPE solution only; no extension cords, splitters, etc.
• Verification of product functionality.
• Must be sold with Standard or Advanced TV Mounting - Add on service only.

• Remove existing thermostat and secure new thermostat to wall.
• Download and configure application.
• Verify functionality.

• Mount up to two Wi-Fi camera in client-specified location.
• Add cameras to existing wireless network or smart hub.
• Verify camera position and coverage is satisfactory for customer.

• Ensure existing lock type is compatible with selected smart lock.
• Install all hardware.
• Pair to app and verify proper functionality.

• Installation covers verifying current voltage of wired doorbell, shutting off power and verifying no voltage is going to existing doorbell.
• Install smart doorbell for Wi-Fi configuration.
• Assist with downloading mobile app and setting up account.
• Educate customer on functionality and personalization of features as well as perform a test run of system.