Panasonic 30" Trim Kit for Microwaves in Stainless Steel

Looking for a space-saving solution in your kitchen? Convert your Panasonic 2.2 cu ft countertop microwave oven to a built-in model with the Panasonic NN-TK932SS 30 microwave trim kit. This Trim Kit consists of the trim frame, an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out opening to give your kitchen a stylish look while freeing up precious countertop space. The Panasonic NN-TK932SS Trim Kit is designed for use only with the NN-SE9**S | NN-SD9**S | NN-SN9**S | NN-ST9**S Panasonic Microwave Ovens. For safety, unplug the microwave oven before attempting installation of the NN-TK932SS trim kit. Installation of this trim kit requires basic mechanical and electrical skills and may be completed by the DIY homeowner or kitchen cabinetry professional. Proper installation is the responsibility of the installer. The microwave oven must be used with a properly grounded 3-prong receptacle in compliance with the National Electrical code, as well as any applicable local regulations. Also refer to the microwave oven operating instructions for other safety and electrical requirements. This trim kit is only compatible with Panasonic Microwave Ovens.

• Stainless Steel 30 Microwave Trim Kit compatible with 2.2cu ft Panasonic Microwave Oven models including NN-SE9**S, NN-SD9**S, NN-SN9**S, NN-ST9**S
• Trim Kit Outer Size 760mm or 30 (W) 472mm or 18-9/16 (H) 20mm or (D)
• Required Cabinet Opening 724mm or 28-1/2" + 8mm or 5/16 0mm (W) 442mm or 17-3/8" +/- 2mm or 5/64 (H) minimum 533mm or 21" (D) and minimum 920mm or 36 from the floor
• Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, 2 (5 /64") mm drill
• Neatly and securely position a Panasonic microwave oven into a cabinet or wall space in your kitchen
• Due to lighting and monitor differences, actual colors and finishes may vary slightly from what appears online.