Helios Helios In-Wall Volume Control, , large

Helios Helios In-Wall Volume Control

SKU#: 56564495
UPC: 086429085675
Model: VC700
  • Not on Display in Omaha Store
  • Order Today!
  • Estimated arrival to Omaha Store: Wed 02/19/25.

Product Description
The impedance matching stereo volume control is a common concept in whole-house audio installation. It is a full range volume control that can be adjusted to meet the requirements of your installation. With a simple change to the impedance matching switch, you can safely connect multiple pairs of speakers to a single amplifier (or receiver). Refer to the charts provided in this manual to determine how to set the switch to ensure the proper impedance level is sent to your amplifier.

Features


  • Features selectable impedance settings at 2X, 4X and 8X
  • Contains white, ivory and bone colored wall plates
  • Installs in either standard single plate or decorator style applications
  • Can be used with any combination of 4 ohm, 8 ohm, or 16 ohm speakers
  • Impedance adjusted easily with a single switch mounted just behind the decorator-style frame- unlike most models, you don't have to remove the entire volume control to adjust impedance
  • 12 steps of attenuation: all the way counter-clockwise is completely off: all the way clockwise is completely open
  • Frequency response: 20 Hz to 20kHz (+0/-2db) at rated power
  • Removable green connecting strips accept up to 12 gauge wire
  • Independent grounds for use with any amplifier
  • Decorator-style faceplate included
  • Fits most plastic electrical junction boxes with a minimum depth of 3.25"
  • Due to lighting and monitor differences, actual colors and finishes may vary slightly from what appears online
  • General
    Accessory Type Volume Control
    Brand Helios
    Dimensions and Weight
    Depth 18.375 inches
    Height 0.750 inches
    Width 5.625 inches
    Weight 1.40 lbs